Anodization is a common surface method for some metal prototypes. Anodization can promote the quality of surface, to make the appearance become more beauty. Then, which questions will be occurred during anodization?

We know that the tool knife of CNC Machining is cambered, the products will keep the round angle after finished cnc machining. Therefore, if the product has right angle need to be made, it is difficult to manufacture by cnc. Then, what should we do?

General speaking, rapid prototyping is used in verifying the function. Only after confirming that the product design is feasible through the verification of the prototype, the customer will want to enter mass production. If you want to make the prototype with good quality, short time, and economical cost. Then, pay attention to the following details when making the prototype:

In the recent past time, the use of CNC has increased a little bit more. The entire manufacturing industry looks very excited since the introduction of this vital study. Basically, CNC machines are very helpful in manufacturing because you can set standard programs in them. In the making of several products, CNC machining is required to control the tools. The role of these machines is very delicate and critical.

Small and large business enterprises need to take into consideration crucial factors before settling on this method of production. Low-volume manufacturing is an essential tooling manufacturing procedure that fabricates machine parts/products for sale utilizing low-volume tools such as Vacuum casting, 3D printing, and CNC machining.

One of the most used manufacturing techniques to make high-volume parts is plastic injection molding. It is a method that relies on using a heated barrel and a particular mold with a cavity in creating different plastic products. It has various applications in different industries, and this article will explore the merits of using plastic injection molding.

3D printing and modeling have become a widely used procedure in a wide variety of industrial sectors. Learning the tricks and tricks of 3D modeling is, at times, tricky for most designers and engineers, especially if you don't have the expertise and the technical know-how.

CNC machining has been growing in popularity in the manufacturing industry for several years. The shocking truth is that with this production technology, it has been easy to design and create several parts or products. Using the CNC machining process will help save producers a lot of time, energy, and money. For this reason, this article will be delving into something new today blind holes. Many people cannot still understand the mystery and details of a blind hole in machining.

Compression moulding is a process utilized to create stock shape materials that are both Thermoset and thermoplastic. It is done by placing a plastic material in the mold cavity that is produced by adding pressure and heat. The two factors combine to force the materials to form the product. Pressure and heat harden the material and then removed it from the mold.

Rapid tooling is an injecting mould tooling that enables an individual to get parts fast and cheap. It has been favoured by several names such as prototype tooling, soft tooling, etc. It is crucial to differentiate between its concept and realization because there are different ways to achieve similar results.

We are at a point where the economic power play of the world has changed, a lot of firms and companies have come to the realization that shipping in manufactured products is quite easy and simple compared to assembling the same products in their plants in different parts of the globe.

FDM in 3D printing is Fused Deposition Modeling technology developed by American scholar Scott Crump in 1988.