News
What Are The Good Processes And Methods For The Complex Customized CNC Machining?
Release time:2018-08-31
In the vowin.cn/en/News/news1251.html' target='_blank'>machining of complex customized CNC vowin.cn/en/News/news1251.html' target='_blank'>machining are very common. For such complex CNC parts processing, the processing methods and process selection must be very cautious, a little mistake, not only increase the cost but also delay delivery!
How should we prevent these potential problems?
1. Analyze the characteristics of the processed material, then determine the blank, and then select the blank according to the process design of the part. The selection of the blank mainly refers to determining the type of the blank, the manufacturing method and the blank size after the margin is determined. If the material of the complex parts is steel, it is necessary to deburr the complex parts according to the technical requirements to ensure that the shape is smooth and beautiful.
2. Determine the positioning standard of complex hardware parts. When selecting the rough reference, it is necessary to consider how to ensure that each machining surface has sufficient margin to ensure the surface processing size and position requirements are qualified. This is indispensable.
3. Develop a suitable process route; the process must not be wrong, and the order can not be chaotic.
4 machine tool selection; whether it is 3 axis, 4 axis or 5 axis, it has suitable parts for machining. Different types of CNC parts need to be machined on different machine tools. Therefore, when selecting the machine tool, it should be based on the design requirements of the parts. set;
5. Precise measurement before shipment to ensure the shipment pass rate. Quality inspection is the last and crucial step. It must be ensured that the products delivered to the customer are fully qualified!
