Point contact type: The so-called point contact type processing refers to the processing method of point contact molding during processing, such as spherical milling cutter machining, spherical grinding wheel grinding in 5-axis machining service, etc. The main feature of this processing method is: spherical The surface normal vector points to the whole space, and it has the ability to adapt to the surface normal vector. Compared with the line and surface contact processing, the programming is simpler and the calculation amount is smaller, and the tool radius is less than the minimum curvature of the surface. 5 radius to avoid interference. Therefore it is suitable for the processing of arbitrary surfaces

Aviation parts are products with high precision and processing difficulty. Half of them are produced by 5-axis CNC machining. First, the materials for aerospace parts must be good because they involve many factors such as pressure and temperature in the air. It is necessary to consider that there must be no problems when using it. Therefore, it is necessary to use suitable materials for processing before processing. Before the processing, the material should be inspected without the appearance of fine holes and some undesirable phenomena to ensure the quality of the material.

It is a casting process for elastomers using a vacuum to draw the liquid material into the mold. The process starts by placing two pieces silicon mold in a vacuum chamber . The raw material is mixed and degassed and then poured into the mold .Firstly, a master model is made by CNC or SLA and polished to the final surface finish of the part for Silicone Rubber Mold making.

Sheet metal fabrication is the process of forming parts from a metal sheet. 3D CAD files are converted into machine code, which controls a machine to precisely cut and form the sheets into the final part. Sheet metal parts are known for their durability, which makes them great for end-use applications (e.g. chassis). Parts used for low volume prototypes and high volume production runs are most cost-effective due to large initial setup and material costs.

Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. A wide variety of products are manufactured using injection molding, which vary greatly in their size, complexity, and application. The injection molding process requires the use of an injection molding machine, raw plastic material, and a mold. The plastic is melted in the injection molding machine and then injected into the mold, where it cools and solidifies into the final part. We exports mould mainly to the USA, Germany, the UK and Holland, they are included injection moulding, insert-moulding, unscrew moulding, over-moulding. The industries we are engaged like automotives, industrial fittings and tools, toys, medical and house appliances.

We have 9 sets auto-lathe machine and turn-mill combination cnc for producing the precision turned parts. CNC turning produces parts by "turning" rod material and feeding a cutting tool into the turning material. On a lathe the material to be cut rotates while a cutter is fed into the rotating workpiece. The cutter can be fed at a variety of angles and many tool shapes can be used Lathe turning machines are able to provide low cost parts for simple cylindrical geometries. All metal and plastic materials,shapes and sizes parts are available to be lathe turned.

DMU65/50 5-Axis CNC Machining Centre is developed and applied not only for some large workpieces with complex surfaces and special requirements, but also for improving the processing, quality and efficiency of these surfaces. Bole has 12sets DMU65 and DMU50 multiple-Axis machines, this type machine is a high-tech and high-precision process tool, specially they are used to process complex surfaces.

When your project requires a production-quality prototype part, look no further than Rapid Prototyping Machining services. We use those manufacturing methods, such as CNC machining, CNC turning, and 3- axis,4axis and 5-axis milling,sheet metal assembling,rapid tooling,injection molding and 3D printing, we can turn your design into a featured prototype in as little as 1-7 days. On time delivery, machined prototypes can be used for form studies, fit-checks, functional testing, and marketing testing.

We provide a range of high-quality 3D printing (additive manufacturing) services, including FDM, SLA, SLS and SLM. This allows for the 3D printing of plastics and metals, and provides options for both prototyping and batch production.

Our plastic injection molding process produces from prototypes to mass production plastic parts in 15+ days.

Our surface finishing Capacity: Passivate,Anodizing,Electroplate,Sandblasted,Oxidation,Bake Painting, Silkscreen, Laser carving,Heat Treatment,Tempering,Polishing,Brushing,Galvanization,Nickel Plating,Oil Spraying,Coating,Ni/Cr/Zinc Plating Some inst

Sheet metal prototyping services offer a fast and cost-effective solution for your projects,including bending,punching, cutting,welding.