Start Your Free Project Review

Resources

Most popular benefits of plastic injection molding technology

Release time:2021-12-25

Most popular benefits of vowin.cn/' target='_blank'>plastic injection vowin.cn/en/News/news1251.html' target='_blank'>molding technology

plastic injection manufacturer

plastic injection manufacturer technology introduction

plastic injection manufacturer is quite famous in plastic products industry. Every industry uses multiple plastic products.  Similarly, the scope of human activity is also associated with it.  The use of plastic from building materials and household appliances to kitchen utensils.

The most popular method for manufacturing various products is plastic injection manufacturer technology. Moreover, modern equipment provides an opportunity to automate the production process.

And receive products with excellent technical characteristics in a short time with minimal investment. Polymer products are recyclable. Therefore, they are environmentally friendly material.

What is plastic injection manufacturer molding procedure?

Injection molding is a manufacturing process in which liquid plastic is injected under pressure into a metal mold. Evenly distributed over it and solidifies. Subsequently, this is the most common method of large-scale manufacturing of plastic products.

The injection molding process requires sophisticated equipment and serious technical training. However, under the supervision of experienced professionals, the costs justify themselves. And the result is a product of excellent quality.

Large-scale and mass production of plastic parts involves a complex process. For injecting molten plastic under high pressure into a prepared injection mold made of metal. Furthermore, the liquid mass evenly fills the volume and crystallizes, acquiring the desired shape.

Thanks to plastic injection manufacturer molding technology. Moreover, it is possible to obtain high-quality products. To implement the method, sophisticated expensive equipment is used that provides high performance.

Using this method, almost half of the polymer parts are produced. Granules of thermoplastics, as well as thermosetting powders. Which give finished products the required physical and operational qualities. Simultaneously, these are used as raw materials for the production process.

plastic injection manufacturer application for injecting technology

Using this method, you can produce almost any plastic product. There are no restrictions on the size or number of parts. Here is a partial list of what can be produced plastic injection manufacturer technology:

  • enclosures for electronic equipment;
  • automotive components;
  • plastic caps and caps;
  • cases for medical equipment;
  • household appliance parts;
  • Kids toys;
  • plastic packaging, etc.

Benefits of plastic injection manufacturer molding technology

Many plastic injection manufacturer choose a cheaper method of production – casting in silicone mold. However, often this choice brings even greater cash costs. And does not guarantee excellent quality.

plastic injection manufacturers

Why is it recommended to choose plastic injection manufacturer in making large batches?

 

High accuracy of the finished product. The supply of liquid plastic under pressure allows it to evenly distribute in shape, filling even the smallest holes.

The ability to receive parts of any complexity, including with very thin walls. For the manufacture of products, a metal mold is made. Similarly, the design of which takes into account all the small details of the future product.

As a result, plastic injection manufacturer can get both simple and very complex product, with many holes and bends.

The minimum need for machining the product. More often than not, the finished product does not require any processing. Moreover, exceptions are very complex products. However, in this case, the improvements are minimal.

Unlimited finished products.

The metal mold, which is created before production, will last a very long time. Subsequently, with its help you can make any number of products.

Low cost subject to the manufacture of a large batch.

The more products will be manufactured, the cheaper the cost of one copy. Because the main budget is spent at the stage of preparatory work. Hence, it is carried out only once.

At the same time, plastic injection manufacturer technology has its drawbacks.

  • the high cost of preparatory work, and
  • accordingly, the unprofitability of manufacturing a product in a single copy or in a small batch.

THE MAIN STAGES OF THE PRODUCTION OF THE PRODUCT BY INJECTION MOLDING

The process of manufacturing plastic products by injection molding involves several stages. Generally, it can be divided into two groups:

  1. preparatory work and
  2. casting itself.

Let’s consider these stages in more detail.

Preparatory work

Creation of 3D models of the future product. You can create a 3D-model according to the drawings, description or photograph. Three-dimensional modeling is carried out in a special program by an experienced specialist.

Prototype manufacturing.

After the 3D model is created and approved, you can create a prototype, i.e. sample of the future product. This is most often done using 3D printing.

 A prototype is necessary in order to evaluate and test the future product.

If any inaccuracies were found, it is necessary to return to the first stage and finalize the 3D model.

Mold design.

This process is based on a 3D model of the future product. When designing, it is important for the plastic injection manufacturers to consider all the smallest details and subtleties.

Mold making.

The finished 3D model is divided into several parts. Moreover, each part is made separately. After which they are assembled into a mold.

Test casting.

Next, using the finished mold, the first copy is made. Furthermore, it is carefully studied and tested. If inaccuracies or flaws were found, the mold is being finalized.

Preparatory work lasts from several weeks to several months. However, this is an important stage in which plastic injection manufacturer should not rush. Because the quality of future products depends on it.

Injection molding process of plastic injection manufacturer

Submission of plastic to the mold under pressure. Moreover, the heated plastic is fed into the mold under high pressure.

Uniform distribution of plastic over the mold. Due to the pressure, the plastic is evenly distributed in shape filling even small holes.

Mold cooling and plastic hardening. Similarly, the cooling time depends on several parameters:

  • type of plastic
  • mold temperature, etc.
  • For small items, this is usually a few seconds.

Delivery of the finished product.

After the mold has cooled, it opens to give the finished product.

What is the cost of plastic injection manufacturer for producing injection mo0lding product?

plastic injection manufacturer in china

As a rule, the plastic injection manufacturer by this method requires serious financial investments at the stage of preparatory work. However, the more pieces will be produced in the future, the lower the cost of one product. At the same time, quality remains high.

The production price is calculated individually, based on all of the product features. What the final cost may depend on

  1. The complexity of theThe higher it is, the more expensive the mold will be, and accordingly, each product.
  2. Type of plastic. The material is selected based on the requirements for the final product.
  3. Number ofpieces in a batch. The more of them, the cheaper each product, and other significant factors.

 

The advantages of plastic injection manufacturer technology

For the production of large batches of polymer products, plastic injection manufacturer technology of plastics is characterized by the advantages of high precision casting. By injecting the molten mass at an increased rate, uniform filling of the mold is ensured, including microscopic holes. Generally, the method is characterized by many advantages, due to which it is popular:

  • Possibility of manufacturing products of any geometric shape and degree of complexity.
  • Thin-walled parts are made. The complexity of the design depends on the mold.
  • Moreover, it has high detail and takes into account all the bends. As well as the holes of the future product.
  • No need for plastic injection manufacturer for subsequent machining of parts.
  • Similarly, some complex products may undergo minimal processing.
  • Mass production of unlimited plastic parts. The life of metal molds is tens of years.
  • So, they are used to manufacture a huge number of polymer products.
  • Quick payback when organizing the production of a large batch of plastic products. At the same time, the cost of one product is reduced.
  • without quality deterioration with an increase in the number of copies produced.
We Chat: Crystal
We Chat: Crystal
We Chat:  Miko
We Chat: Miko
We Chat: Phil
We Chat: Phil

Get In Touch or Get A Quote

+86-755-29981960 Moble,What's app, Wechat: (+86) 18565691928 Rfq@vowin.cn

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click wetransfer and send to Rfq@vowin.cn.
深圳沃优达科技有限公司 粤ICP备16123490号